More rough opening tips.
Mirror bypass door rough opening.
2 leaf door 72 x 96 fits for rough openings with the following dimensions width.
Bypass detail cross section view 81 3 4 net finished opening height 1 1 4 minimum 1 9 16 maximum 3 8 finished floor no carpet pocket detail 84 1 2 rough opening height 3 4 minimum hinges colors light brass bright brass antique brass oil rubbed bronze satin nickel antique nickel polished chrome dull chrome black all prehung doors.
The height can be trimmed off the doors if you get it wrong but where i learned the rough opening was almost always 2 larger than the door size.
The finished opening should be just about the same size.
Maximum allowable deviation from square is normally 1 4.
Verify the rough opening is square.
The finished opening for bipass should be 63 which is why it s hard to convert to bifold in the future.
The door is made from steel for durability with a large mirrored front for a full length reflection.
Verify the rough opening is level and plumb.
Steel white mirror sliding door offers a space saving design with a beautiful finish.
The doors have rollers that are adjustable so if the call out size is 60 x 80 than that would be the opening size that it would fit in.
82 1 2 would be ok too as you may want room for carpet.
This handsome door is finished in a clean white color that coordinates well with any home.
Asked by bigdog november 11 2020.
Cased openings special size bifolds see page bf 12 how to determine handing 2 door units specify 4 door units left hand or right hand when ordering available set up or assembled as shown left hand right hand when the door folds to the left it is a left hand door.
When it folds to the right it is a right hand door.
Cw door provides your passageways with style and architectural elements with the brittany steel white mirror bypass door.
68 to 73 height.
The diagonal measurements should be the same.
The truporte 230 series 72 in.
Hello bigdog this model will fit finished opening heights from 80 in.
Rough opening jamb type add.
So for the rough opening all you would have to do is minus the thickness of whatever you are using to finish it with.
95 1 2 to 96 1 2 if your closet rough opening does not meet the standard dimensions please contact us to determine the appropriate door and hardware size.
Verify the width and height of the door frame are each 1 2 smaller than the rough opening width height.
Do they come w.