Microwave Level Switch

The transmitter emits a continuous low power microwave beam towards the receiver and an output relay is released when the beam is obstructed.

Microwave level switch.

Typical applications are the detection of bulk solids in silos bunkers and crushers as well as of liquids in tubes and vessels. The transmitter mws2 24tn transmits microwaves in 24ghz toward the receiver mws2 24rn which upon receipt of them provides an output of the contact signals that the tank is empty. The vegamip t61 is the emitting unit of the microwave barrier for level detection of bulk solids and liquids. The microwave field penetrates several millimetres into the medium.

Mws blocked chute detector the hycontrol mws microwave blocked chute detection system provides a simple non contact non intrusive option suitable for many applications on dry powder or granular product. This diode converts the low level microwave signal to a low level pulsed dc which is then amplified by an adjustable gain low noise ic amplifier to a 0 10 volts dc control signal. Delevan microwave 320 for accurate position level control delavan s model microwave 320 is a single point electronic switch for on off action. Mws st sr 11 type microwave sensor is a level switch which consists of a transmitter mws st and a receiver mws sr installed face to face.

It can be used for level control as well as detection of objects. In the receiver the signal is received by a directional antenna and coupled to a mixer cavity containing a schottky detector diode. Microwave level switch for liquids with 20 water content accurate switching point without adjustments hygienic installation in accordance with ehedg wetted parts compatible with fda requirements potted electronic not influenced by vibrations not influenced by foam or adhesions compact and rugged design led indicators red green. Mws2 type microwave switch is a level switch consisting of a transmitter and a receiver both of which are installed face to face each other.

Foam condensate or remains of the transported medium that have stuck on to the tank are not detected. Microwave the hycontrol range of microwave level switches provides a simple non contact non intrusive option suitable for many applications on dry powder or granular product. The gladiator microwave level switch provides point level indication for presence or absence of most solid and liquid materials it may be used in chute level application where microwave energy is absorbed by the material being monitored. By using this principle of measurement it is also possible to detect non conductive media.

The kobold lnm microwave level switch is used for detecting levels of fill.